NZXTH710i Review | PCMag

The NZXT H710i ($ 169.99) ATX PC case is near the top of the NZXT product line and for good reason. It’s big, bold and hides a lot of cool and premium things under the hood and behind the panel. It’s a significant improvement over the company’s reputed H510i case, and is worth a look if you like the spirit of the chassis with its unique clean design and futuristic look known as NZXT. (However, you also need to look for a large motherboard and plenty of space for full-scale cooling. It’s not a compact box.) This is a premium chassis, so I added some to the port loadout and some I want to polish it. Although there are several items, the H710i is suitable for serious adjustments considering esthetics, performance hounds, and water cooling with multi-fan radiators or rugged air cooling.

Case design: minimum to maximum

The NZXT H710i reflects the style of many other cases of the company. Aesthetics is a matter of personal taste, and it is difficult to objectively judge a case based on its appearance. Some people will think that the H710i looks pretty bland and comes off. Others will appreciate the relative lack of bling. (In the latter case, that’s exactly what makes it attractive.)

I received an all-black (inside and outside) version of the case for NZXT. This version has a black cable hiding and a routing bar running vertically inward. NZXT also offers a white exterior version with a black interior and white cable bar, and a black interior and exterior version with contrasting red parts (including the red cable bar). Our test model looks the most minimalist in the lot. The front, top, and right panels of the H710i are all in one solid color with few identification marks. It features only the NZXT logo on the front of the case and the less populated I / O panel on the top of the chassis.

It goes without saying that the H710i does not have as much air intake as its competitors due to the lack of vents on the front. I’m not saying it’s blocked. NZXT has placed strips of perforated material on both the left and right sides of the case. This trim straddles the top and bottom of the front of both side panels. Depending on the system design, this may allow for large inflows. However, the lack of ventilation holes on the front and top will undoubtedly allow significantly more free inflow in some other cases, such as the Be Quiet Pure Base 500DX.

The left panel is fully tempered glass. This shows the interior of the case a bit more impressive, depending on the color scheme of the H710i model selected. The red and black models and the white and black strip models have some welcome contrasts and features. Our monotone tester is not very visually interesting.

The front I / O panel (technically the top of the case) is surprisingly lightweight, with few ports and power buttons. It has one 3.5mm audio jack, two USB 3.1 Gen 1 Type-A ports and one USB 3.1 Gen 2 Type-C port. To use the latter port, you’ll need a modern motherboard with a Type-C header, so check that or plan to buy an adapter or PCI Express card with a header. (To connect directly to the motherboard without a header, you need an adapter that converts a USB 3.0 19-pin header to a USB-C header, which limits the port to a speed of 5 Gbps instead of 10 Gbps.)

The internal wells of the system are slightly larger. This means that the case can be a standard ATX motherboard or an Extended-ATX (E-ATX) board. You may also notice that there is a vertical PCI Express slot in front of the regular PCIe backplane. You can run a vertically mounted GPU here, but as in most cases, the H710i doesn’t include the hardware or GPU riser cable to do that. You have to procure it yourself.

On the other hand, inside the chassis, there are well-hidden premium features. An updated fan controller for NZXT. The controller looks like a perforated square and works with the company’s CAM software to adjust and optimize the fan curve. The case comes with three of the company’s 120mm Aer F120 case fans, one on the front and one 140mm Aer F140 on the back panel. This gearset is likely to push the H710i’s $ 169.99 price up, which means you should always use the CAM controller and fan before jumping in. If you want to throw them away or ignore them, we recommend that you consider the cheaper ($ 139.99). H710 instead.

CAM software is better than the average bear for fine-tuning the inside of the chassis fans and lights. In addition to the three fan channels, the hardware box can also control two RGB LED items connected to the controller and up to four HUE 2 LED strips. Two strips are built into the case for addressable ambient lighting. (One on the top and the other on the back of the cable hider bar, connected in series.) These also push up the price. Among the four fans, the CAM controller, and the strip, many of the causes of the H710i’s price premium are not immediately apparent from the outside.

Architectural experience

The NZXT H710i lacks an obvious flash, but it’s compensated for by providing a relatively easy build experience and real-world intelligence. The glass panel on the left can be easily removed by removing one screw and gently pulling the panel from above. From here you can angle an ATX or E-ATX motherboard (or smaller, but it looks weird) and a graphics card up to 16 inches long. Putting the motherboard in place is slightly hindered by the NZXT signature cable hiding bar, which is a minor inconvenience at best. You can remove it before you start, but you probably need to, in which case you need to screw the screw from the back panel to remove the LED strip on the bar.

Entering the right side of the case is even easier than opening the left side. There are no screws to secure the right panel. Instead, pressing a button on the back panel releases the panel. I wish NZXT had used this feature on the left side of the case as well, but since it’s glass, I know why I want it to be safer. Most builders need to access parts on the left side of the case, such as the motherboard, GPU, RAM (and possibly storage) much more often than on the other side. In any case, it’s great that this makes it easy to open either side of the case.

In total, the H710i can hold up to seven 2.5-inch drives and two 3.5-inch drives, but not all can be used at the same time. At the bottom of the case is a hard drive cage that can hold two 3.5-inch drives or four 2.5-inch drives. Two more 2.5-inch drives can be mounted behind the motherboard tray.

The final 2.5-inch drive mounting position is on the side of the PSU compartment at the bottom of the case, which is a last resort. It’s difficult to route the cables to the drives here. This can be done by removing the cable bar, threading the cable through the hole set behind it, and then replacing the bar. However, it is much easier to use other mounting locations if possible. But if you have a 2.5-inch SSD (RGB SSD, who?) You want to show off, this is the place to go.

At the top of the case there is space for up to three 120mm case fans or 360mm water-cooled radiators, but some work is required to access these mounting locations. To reach them, you must first push the plastic clips around the panel to remove the front panel and then pull it up. Then do the same for the top panel, which is made even more difficult by the presence of LED strips and cable bars. It’s certainly feasible, but based on my experience, if you plan to add a case fan or liquid cooler radiator on top from the beginning, be prepared for a little more work than usual. This is the price you pay for the front and top panels without such features (and no fasteners).

However, once under the top panel, installing the radiator is not difficult. Obtain a bracket with the four thumbscrews in place. You can remove it and insert a radiator (again, up to 360mm, to fit the monster) from above. The radiator is on the rails and the fans are on the bottom. Alternatively, you can turn the radiator over. However, it is important that the details of this design ensure that the entire radiator and fan sandwich does not block the edges of the motherboard. That’s the real reward for removing the panel.

As in most modern cases, the power supply unit (PSU) is mounted at the bottom of the chassis, but unlike most cases, the PSU is inserted from the back panel instead of the right side. Now remove the bracket and bolt it to the back panel of the PSU. Then slide the PSU from the back and bolt the bracket back in place.

This PSU mounting solution may sound more complicated than simply inserting the PSU from the side of the case, but in practice it turns out that this system works better. You may need to tighten or loosen the screws, but it’s easier than aligning the PSU from the side and fixing it with your other hand. You can also gradually slide the inside of the box from the back panel to help route the power cables more efficiently.

To facilitate cable management, NZXT has also added some plastic channels and velcro trips to the area behind the motherboard mounting tray. These help guide the cable in place and push the cable in place. This means that you’re less likely to have an infamous “panel stuffing” session and try to install the right panel with crushed, bulky cables everywhere. Admiration for NZXT for the comfort of this PC builder creature. It is enough to control the main 24-pin power cable.

Verdict: Enough case, but the price is …

All in all, the H710i is a solid builder chassis, but it’s a different matter whether you value its high $ 169.99 price tag. The black model in particular looks pretty good, the building experience I rate is basically average, and there are some perks such as backloading PSUs and cable channeling behind the motherboard tray. The front I / O panels are sparse due to the case for that price. The best feature of the H710i is arguably the single side panel with push-button opening action, but the relatively small potatoes in the premium chassis zone where this case resides.

To name a few, Thermaltake View 51 Snow ARGB Edition ($ 189.99) and ADATA XPG Battlecruiser ($ 179.99) are both similar prices, with different feature combinations, with and without better suitability. It may be. The Be Quiet Pure Base 500DX mentioned above is more practical, but offers a better building experience at a significantly lower price of just $ 109.99.

If you like how it looks, the H710i is essentially fine. (If so, you’ll end up buying 80% of your PC case.) You really need all the extra features you’re paying for, such as a CAM controller, LED strips, and a perfect complement to the four fans. Please confirm that. And less but more look. Only then will it be a good deal. Otherwise, shop for sale.

Pros

Rugged build quality

Integrated RGB strip and fan / RGB controller

Press the button to open the right panel

Left side of tempered glass

Smart radiator mount scheme

A nifty cable routing channel behind the motherboard tray

See more bottom line

For a premium chassis, the NZXT H710i has a clean, minimalist look and the comfort of a smart creature that will make a seasoned PC builder smile. If the price is a little cheaper, it’s definitely worth it.

NZXT H710i Specifications Motherboard Form Factor Support ATX, MicroATX, Mini-ITX, E-ATX External 5.25-inch Bay 0 Internal 3.5-inch Bay 2 External 3.5-inch Bay 0 Internal 2.5-inch Bay 7 Front Panel Port USB 3.0, Headphones, USB 3.1 Type C Side Window? Yes (Tempered Glass) PCI Expansion Slot Position 7120mm or 140mm Fan Position 7120mm / 140mm / 200mm Fans Included Do you include 4 fan controllers?Yes Maximum GPU Length 413mm Maximum CPU Cooler Height 185mm Power Supply Form Factor Supported ATX Power Supply Mounting Position Lower Internal Chassis Illumination Color RGB Dimensions (HWD) 19.45 x 9.06 x 20.32 inches Weight 27.12 lbs Best PC Case Pick Details

What Are The Main Benefits Of Comparing Car Insurance Quotes Online

LOS ANGELES, CA / ACCESSWIRE / June 24, 2020, / Compare-autoinsurance.Org has launched a new blog post that presents the main benefits of comparing multiple car insurance quotes. For more info and free online quotes, please visit https://compare-autoinsurance.Org/the-advantages-of-comparing-prices-with-car-insurance-quotes-online/ The modern society has numerous technological advantages. One important advantage is the speed at which information is sent and received. With the help of the internet, the shopping habits of many persons have drastically changed. The car insurance industry hasn't remained untouched by these changes. On the internet, drivers can compare insurance prices and find out which sellers have the best offers. View photos The advantages of comparing online car insurance quotes are the following: Online quotes can be obtained from anywhere and at any time. Unlike physical insurance agencies, websites don't have a specific schedule and they are available at any time. Drivers that have busy working schedules, can compare quotes from anywhere and at any time, even at midnight. Multiple choices. Almost all insurance providers, no matter if they are well-known brands or just local insurers, have an online presence. Online quotes will allow policyholders the chance to discover multiple insurance companies and check their prices. Drivers are no longer required to get quotes from just a few known insurance companies. Also, local and regional insurers can provide lower insurance rates for the same services. Accurate insurance estimates. Online quotes can only be accurate if the customers provide accurate and real info about their car models and driving history. Lying about past driving incidents can make the price estimates to be lower, but when dealing with an insurance company lying to them is useless. Usually, insurance companies will do research about a potential customer before granting him coverage. Online quotes can be sorted easily. Although drivers are recommended to not choose a policy just based on its price, drivers can easily sort quotes by insurance price. Using brokerage websites will allow drivers to get quotes from multiple insurers, thus making the comparison faster and easier. For additional info, money-saving tips, and free car insurance quotes, visit https://compare-autoinsurance.Org/ Compare-autoinsurance.Org is an online provider of life, home, health, and auto insurance quotes. This website is unique because it does not simply stick to one kind of insurance provider, but brings the clients the best deals from many different online insurance carriers. In this way, clients have access to offers from multiple carriers all in one place: this website. On this site, customers have access to quotes for insurance plans from various agencies, such as local or nationwide agencies, brand names insurance companies, etc. "Online quotes can easily help drivers obtain better car insurance deals. All they have to do is to complete an online form with accurate and real info, then compare prices", said Russell Rabichev, Marketing Director of Internet Marketing Company. CONTACT: Company Name: Internet Marketing CompanyPerson for contact Name: Gurgu CPhone Number: (818) 359-3898Email: [email protected]: https://compare-autoinsurance.Org/ SOURCE: Compare-autoinsurance.Org View source version on accesswire.Com:https://www.Accesswire.Com/595055/What-Are-The-Main-Benefits-Of-Comparing-Car-Insurance-Quotes-Online View photos

picture credit